The difference in material of lamp bead bracket:

At present, there are aluminum brackets, brass brackets, purple copper brackets, etc. on the market. Aluminum brackets and purple copper brackets are expensive, with a price difference of more than ten times. Even for copper brackets, the price of silver plating varies, and the market generally refers to them as good brackets, most of which are made of brass silver plating.

The difference in chip size:

The chip size usually reported is in mil. Without a high-power measuring microscope, it is difficult to distinguish between them. The larger the chip, the brighter it is. We can compare chip sizes by calculating the chip area, such as 23X10. The chip area is 230 square mil, and using the chip area to distinguish chip sizes is a good method.

The difference in wire bonding materials:

The chip and bracket are connected by gold wire welding method for electrode connection. Currently, there are two types of wires on the market: alloy wire and pure gold wire. Pure gold wire is divided into 0.7, 0.9, 1.0, 1.2, etc. according to thickness. The thicker the gold wire, the lower the thermal group and the longer the lifespan. Therefore, it is necessary to clarify the material and diameter of the gold wire.

The difference between fluorescent powders:

White light bulbs are made by adding blue light chips and yellow fluorescent powder. The fluorescent powder is mainly divided into aluminum salts and silicates. Aluminum salts have better performance than silicates, represented by YAG. YAG has stable performance and low light attenuation, while silicates have poor chemical stability but higher brightness. If you want to make products with stable performance, don't be fooled by the so-called high brightness, which is a big problem.

The difference between glue:

Fluorescent powder needs to be mixed with glue and then applied onto the chip. The quality of the glue affects light decay and color drift. Poor glue will turn yellow and light decay will increase over time, while good glue is jelly glue.

Specifications for color separation, voltage division, and spectroscopy:

Color separation: It refers to color temperature grading, such as 3200K-3350K as one level. Legitimate packaging factories will provide BIN codes for color temperature. The smaller the color temperature grading, the better. A smaller color temperature grading ensures good color consistency of the light source produced.

Voltage division: It refers to the voltage division of the chip, such as 3.0V-3.15V. For the light source, it is connected in series and parallel, and the voltage division is controlled within 0.15V. This ensures uniform current distribution of the light source, which is beneficial for improving its lifespan.

Spectral division: It refers to the classification of lamp bead brightness, including lumen division or light intensity division. For lighting sources, lumen division is used. It is recommended to purchase LEDs based on their light efficiency. Products with high light efficiency are more energy-efficient and have a longer lifespan.

部分圖文轉載自網絡，版權歸原作者所有，如有侵權請聯系我們刪除。如內容中如涉及加盟，投資請注意風險，并謹慎決策